How to Hookup This Audio package?

Question

OK i just bought a sub this one ->http://www.bestbuy.com/site/olspage.jsp?skuId=8265717&type=product&id=1170289779897

Specs

Product Features

Handles up to 300W peak power (150W RMS)

Polypropylene woofer with parabolic, acrylic dust cap

High-temp voice coil with spun lace Nomex insulating reinforcement collar

Tear- and fatigue-resistant polycotton spider

Optimized motor magnetics with extended pole and bumped backplate

Spring-loaded connection terminal

High-density compressed half-roll sealed poly foam surround

Sensitivity: 85dB

Impedance: 4 ohms

and bought this wiring kit

20' CRCA20 RCA cable

30' 16-gauge speaker wire

20' 8-gauge fused power wire

3' 8-gauge ground wire

16' 18-gauge turn on wire

4" wire ties

#10 gold-plated ring terminal

¼" gold-plated ring terminal

5/16" gold-plated ring terminal

3 rubber grommets

Amp Specs

amps bridagbel

Power Plus Series 2-Channel Class AB Car Amplifier

RMS Power Rating:

4 ohms: 65 watts x 2 chan.

2 ohms: 90 watts x 2 chan.

Bridged, 4 ohms: 170 watts x 1 chan.

Max power output: 105 watts x 2 chan.

LED power and protection indicators

Blue illuminated VU meter display

Tuned Bass EQ (0-12 dB bass boost at 45 Hz)

Bridgeable operation

Compact design

Encapsulated power and speaker terminals

Preamp RCA outputs

Short circuit, DC offset, thermal, and overload protection circuitry

Extruded aluminum alloy heatsink

Variable high-pass filter (40-400 Hz, 12 dB/octave)

Variable low-pass filter (40-240 Hz, 12 dB/octave)

CEA-2006 compliant amplifier

Frequency response: 10-60000 Hz

Dimensions: 10.5"L x 11.75"W x 2.5"H

8-gauge power and ground leads recommended. Contact us for information regarding a discount on a select amplifier kit when purchased together.

1-year Manufacturer's warranty

Now I dont know weather or not to bridge the amp or realy what to do i have very basic knowledge of what to do i have a aftermarket deck so in your opinion how should i hook this up a diagram would be helpful

Answer 1

http://www.ehow.com/how_3680_install-car...

This will tell you step by step how to hook up an amp.  And yes, I would recommend bridging the sub to your amp.

Answer 2

Definately bridge the amp, it will give u more bass.  And if ur talking about starting from scratch, u gotta run the red power 8 gauge wire from ur battery or fuse box to the amp.  From there u must connect the black 8 gauge grounding wire to a piece of raw metal on the car.  what i mean by raw is that there is no paint getting int he way.  Next run the RCA cords fromt he back of ur headunit (stereo) AND the amp turn on which will be a thin blue wire.  Find where the amp turn on line is located in the wiring harness and attach that.  Send both of those wires back to the amp and plug them in.  From there just attach the positive and negative wires to the sub box and the amp and blast away.

Answer 3

i would bridge it to get the most power then just run your wires like hooking up a normal amp