Question:

How to change Harley Tour Pack Lights?

by Guest64674  |  earlier

0 LIKES UnLike

I have a 2002 Harley Davidson Ultra Classic Electra Glide. One of the tour pack side lights is dead. How do I get to the bulb? Jerry

 Tags:

   Report

1 ANSWERS


  1. 1. Open Tour-Pak

    2. On Ultra models, open map pocket and remove acorn nuts.       Remove map pocket and molded liner from Tour-Pak.

    3. Remove three T15 TORX screws to release lens at side of Tour-Pak.

    4.  Using the blade of an X-Acto knife or small screwdriver, gently pry up three eyelets on inboard side of mounting bracket. Remove eyelets and then remove mounting bracket from lens, Discard eyelets if damaged.

    5. Remove bulb from socket and discard. Install new bulb in socket.

    6. Align holes in mounting bracket with those in lens. Push three eyelets through mounting bracket holes into bosses of lens. Use new eyelets if damaged.

    7. Place lens assembly into position at side of Tour-Pak, but exercise caution to avoid pinching or kinking wires. Note that center rib on inboard side of lens has a stepped area for routing the top wire.

    8. From inside of Tour-Pak, install three T15 TORX screws. On Ultra models, install molded liner in Tour-Pak. Install map pocket and secure using acorn nuts.

    10. Close Tour-Pak.

    Piece of cake,,,,isn't it?

Question Stats

Latest activity: earlier.
This question has 1 answers.

BECOME A GUIDE

Share your knowledge and help people by answering questions.