How to get to Prague from Brno Airport?

Question

Heya, I'm flying out to Brno airport from London and was wonering if anyone knew how to get to Lipanská (2 station stops on from Main Station Prague..i think!) from Brno on train. And if they did roughly how much it costs and how long it takes. Thank you for any help it's most appreciated!!!!

Answer 1

From Brno Airport Bus Number 76 takes you to the main station (Hlavni nadrizi; hl.n.). From there trains to Prague take more than three hours, but the is a bus shuttle too, which takes about 2,5 hours.

http://www.idsjmk.cz/EN/pozor%5Chowtoget...

Answer 2

Hi, let me guess, you are using RyanAir to get to Brno airport from London Stansted if I am correct because I took that route.

I have seen a bus that leaves the airport and I believe it takes you straight to the city centre where Brno's main train station is and the bus number is 76 in case you do not wish to take a taxi.

The travel time from the centre to the airport is exactly 20 minutes. For one journey you need the 2-zones ticket valid for 60 minutes. It costs 15 CZK (0,40 GBP or 0,50 EUR) for adult(s).

I have not found anything for Lipanská but for the main station in Prague or Prague-Holesovice. The journey takes from 2 and half hours and up to 4 depending on time of route and if direct or not.

If you are arriving on RyanAir, then my guess would be around 4:15 p.m., so there is a train at 4:46 p.m. to arrive at Prague main station at 8:19 or 5:43 p.m. to arrive at the main station at 8:33 p.m. but it is possible that schedules can change.

Prices are about 314 Kč / 236 Kč .

From the main train station in Prague:

Get a ticket at least 26Kč tram ticket (validity 30 minutes) and go outside the building. Once you are out, turn right and go through a small park - 50 metres to tram stop. Take a tram No. 5 or 9 and get off the second stop called "Lipanská".

Hope this helps.