How to install a camshaft position sensor on an 01 dodge intrepid 2.7 litre v6?

Question

How to install a camshaft position sensor on an 01 dodge intrepid 2.7 litre v6?

Answer 1

if you can reach it. you may have to remove the upper panel plate that is holding the radiator and headlamps. if you do it only takes a 13mm socket a 10mm socket and a 7mm socket. just look over the panel and it is very easy to see how it comes off. the cam sensor bolt is on the front of the cyl. head on the drivers side. the bolt is a stud type that also holds the wire harness. the wire harness just pulls right off. once you have removed the harness remove the bolt with socket or wrench. it is a 13mm. the cam sensor pulls right out and only goes in one way. hope this helps.