How to program RCA remote to SANYO TV and what code for remote #rcr350?

Question

How to program RCA remote to SANYO TV and what code for remote #rcr350?

Answer 1

Sanyo. 1004, 1048, 1049, 1073, 1080, 1162, 1169, 1180

1. Manually turn on the component you want the remote to control

(TV, VCR, DVD, satellite receiver or cable box).

2. Press and hold the component key (TV, VCR·DVD, SAT·CBL) you

wish to program. The LED indicator light turns on and remains on. If you release the component key any time during the Direct Code Entry

procedure, the LED indicator light blinks four times, and the process

is exited.

3. While holding down the component key, enter the four-digit code that corresponds to your component’s brand. While you are pressing the numbers, the LED indicator light turns off.

5. After the fourth number is entered, the LED indicator light turns on. At this time, release the component key.If the LED indicator light turns off, you have entered a valid code and have followed the correct procedure for Direct Code Entry. If you enter a code number that

is not in the Code Lists or you do not follow all of the steps for Direct Code Entry, the LED indicator light blinks four times when the component key is released. This is an indication that a programming error has occurred. In that case, repeat the Direct Code Entry process from step 2 and try the next code listed.