How to program a GMC Jimmy 1995 Keyless Remote? ?

Question

I have a GMC Jimmy 1995. I just got another Keyless Remote..

I need to know how I program it to work on my truck.

Anyone know how?

Answer 1

Reprogramming Transmitter

The reprogramming connector is located near the RKE module. It is a RED connector with two wires.

The keyless entry programming connector is located near the RKE module.* It is a RED connector with two wires. The RKE module is located behind the LH hushpanel.Under left side of dash The RKE module is screwed to the black plastic panel .

Short the reprogramming connector terminals together.

Receiver will respond by locking and unlocking doors within 2 seconds.

Press any button of the first transmitter to be programmed.

The control module will respond by locking/unlocking doors and activating rear window release.

Press any button of the second transmitter to be programmed (if used).

The control module will respond by locking/unlocking doors and activating the rear window release.

Remove the ground applied to the programming connector.

Transmitter operation is verified by locking and unlocking the doors and activating the rear window release.

Answer 2

you have to go to the dealer