How to replace a thermostat on a '92 Honda Accord and where is it located?

Question

How to replace a thermostat on a '92 Honda Accord and where is it located?

Answer 1

behind the distributor look at the long radiator hose, you have a ground remove that ground, and remove the hose. You will see 2 10 mm screws, that is the thermostat housing. I would also replace the thermo switch.  Note the autozone stuff did not work very well, I ended up using honda parts.

Answer 2

Most thermostats are in a housing that connects to the upper radiator hose

Answer 3

Fellow the top radiator hose down from the radiator to the engine which ends up just under and to the left of your distributor , Remove the hose clamp then pull the hose off . Now get a 10mm socket with a extension to remove the two bolts from the thermostat housing, When your about to remove the housing take note on the way that you remove the parts.