How to reset change oil light on a chevy impala 2003 using the ignition?

Question

can anyone please help

Answer 1

USING THE RADIO:

Follow this procedure to reset the GM Oil Life System. ™:

Turn the ignition to ACC OR ON, with the radio off.

Press and hold the TUNE DISP button on the radio for at least five seconds until SETTINGS is displayed.

Press the SEEK PTYPE or the SEEK PSCAN up or down arrow to scroll through the main menu.

Scroll until OIL LIFE appears on the display.

Press the 1 PREV or 2 NEXT button to enter the submenu. RESET will be displayed.

Press the TUNE DISP button to reset. A chime will be heard to verify the new setting and DONE will be displayed for one second.

Once the message has been reset, scroll until EXIT appears on the display.

Press the TUNE DISP button to exit programming. A chime will be heard to verify the exit.

USING THE ACCELERATOR PEDAL:

Follow this procedure to reset the GM Oil Life System ™:

Turn the ignition to ON, with the engine off.

Fully press and release the accelerator pedal three times within five seconds.

If the CHANGE ENGINE OIL message flashes, the system is reset. However, if it stays on , it did not reset. Repeat the procedure.