How to share my internet connection to my lan users

Question

i want to give access the internet to my lan users, I have one connection. how tell me

Answer 1

http://support.microsoft.com/kb/306126

Answer 2

A normal fast ethernet switch can support upto 7 stations. Netgear is a good option, Iam using this for some time now. Get some good quality cables sicne the jack will go off after a few plugin plugouts.

From the Ethernet pin of your modem connect to any  one pin of the Switch. Connect the other wokrstations to other pins in he switch. Your lan is ready. There is no need of installing any drivers for this.  

Answer 3

if u have broadband connection in ur pc then by adding dsl/internet router or switch u can extend ur internet connection for other users. and if u have high speed dial up connection used for office purpose then u nhave to implement ics(internet connection sharing) protocol in ur computer. i u want diagram then mail me ur mail id at [e-mail].

Answer 4

make sure that u have 2 lan cards 1for local area and 1 lan card for u r isp ip address,go in network connection select 1 lan put u r isp ip address in that lan card right click on that and then click on advanced then click on allow other network users to connect through this computers internet conncetion.share it by using this and in 2nd lan just put u r local ip address in 2nd lan for eg 192.168.0.1 subnet255.255.255.0 for main machine and for other 192.168.0.2 subnet 255.255.255.0 dns and gatway will be 192.168.0.1

done

Answer 5

How is your LAN set up?  Those details would be neccecary to suggest any solution whatsoever.

What's plugged into what?  Who's your ISP?  Is it cable, DSL, or dial-up?  Are you using a router or something else for your LAN?  What OS do the computers have?  Do you use file-sharing?

The more detail you provide, the better an answer and more accurate the steps we can provide.

Answer 6

Are you using a router, switch, or hub, all three can be configured for a LAN, and depending on which you are using will depend on the setup.

Answer 7

Hi! At first you have connect the system by using a switch or hub. Then install a proxy server software. Give the proxy system's ip address as proxy server in Internet explorer--->tools-->Internet options--->connections--->lan settings--->proxy server(that ip address), port(8080 or 80)..

Answer 8

You need to purchase an internet router and follow manufacturers instructions on set up.