How to upgrade an airsoft electric gun?

Question

I have a Classic Army SAR M41 sportmatch SG. It has 350 FPS currently and i want to upgrade it to about 400-450 FPS.

Answer 1

This site may be able to offer you some guidance:

http://www.airsoft.org/AirsoftUpgradePar...

Answer 2

Why would you want to? You don't get greater range from a 450 fps gun than a 350 fps gun. If you just want to hit harder you have to remember THESE AREN"T REAL GUNS so the force of the bbs striking the target dosent matter

Answer 3

Try this!

http://www.airsoft.org/AirsoftUpgradePar...

Answer 4

If you are still running in an all stock AEg you need to replace your... spring to SP130 or M130; replace your gear set w/ a helical super torque up set...you may chose systema or CA or TM gear set; change your spring guide to a metal w/ bearing; change your piston to DEEP FIRE titanium full tooth;and your pistone head should be a polycarb one, don't use a metal one for your piston head coz it will damage your gearbox; change your internal barrel to a tight barrel 6.06 for a SAR M41...

Basicaly this is what you need.

1. CA Helical Super torque up gear set

2. SP130 or M130 spring

3. Metal spring guide w/ bearing( Better check for it's version)

4. tight barrel 6.06 for SAR M41 Sportmatch SG

5. DEEP FIRE titanium full tooth piston body

6. Policarb piston head

7. metal shim set

8. Change your bat to 9.6v 2400mah ni-cad or to 11.1v 2200mah 20c li-poli

Answer 5

This forum thread should answer most of your q's, it is focused on all mechbox upgrades to achieve a specific velocity / energy

Recommended Parts To Upgrade At A Certain Fps

http://www.airsoftforum.com/board/index....