Question:

Hydrogen car kit does it work?

by  |  earlier

0 LIKES UnLike

Hydrogen car kit does it work?

 Tags:

   Report

6 ANSWERS


  1. There is another kit not yet on the market but after doing alot of personal research it has the most promise. The company is named united nuclear and they are working on a kit that will allow you to create your own hydrogen at home and fuel tanks that will allow you to store the hydrogen in greater denisty then just compressing it and it is way safer. The kit will replace gasoline as your power source since hydrogen will work in a standard combustion engine. You willhave to modify your car alittle and don't worry about the lack of hydrogen fueling stations since your car will still run on gasoline if you should need it to such as a long trip. Cost hasn't been announced yet but I woud have to guess a conversion kit would run between 5000-10000 based on component prices at other locations. Hope that helps.


  2. If you're talking about one of those jam-jars filled with water and baking soda hooked up to your car's electrical system then the answer is a resounding "No, it doesn't work".

    In fact it's worse than that -- it's a giant scam.

    Check out the links below for the full and very revealing story about these scams.

  3. Yes, this technology has been known about for about 7 years, and is now only just hitting the market.

    The $""$£%^ in the oil market and corrupt governments prevented the info from becoming public for a long time, but now its out there, there is no stopping it.

  4. I'm not sure which "kit" your referring to. But running vehicles using hydrogen fuel has both advantages and limitations.

    Hydrogen fuel cells are electrochemical devices which convert fuel directly to electricity without combustion so no intermediate (e.g. no mechanical energy)

    The process is opposite to electrolysis.

    Hydrogen Fuel cells work by, Exposing to a catalyst. H atoms split giving off a stream of electron and H+. The H+ ions travels through the FC medium that only permeable to H+ Electrons pass through an external circuit to anode, where they combine with O2 & H+ to form water. The flowing electrons generate a current that can be used immediatly or stored for later use.

    Hydrogen power has great potential. But like all energy sources it too has limitations.

    Advantages

    – Super clean & high efficiency

    – H2 can be obtained from renewable energy or sources other than oil

    – Can be used as baseload power & for transportation

    – Modular, easy to operate & retrofit can be used for cars unlike many other green energy sources.

    Barriers

    – Problematic: to heavy and occupy to much space.

    – Cost is still high, outside of commercial range Size, weight, capacity of PEM fuel cells are problematic for light vehicles

    – Not yet provide rapid start up

    – Problem in cold weather

    – Fuel reformer and auxiliary infrastructure. Like most new energy sources infrastructure changes will have to be made.

    – Safety issue with H2.

    It is possibel, there are already vehicles running on this system but some concerns still remain.

  5. let me start off by saying Hydrogen is a great option for the concept of free energy.     I built my first hydrogen cell about 5 years ago. Have converted over 50 vehicles in the last 10 years (gydrogen and EV) and now currently run 2 trucks (and another EV), my home hot water heater, home stove and home generator on hydrogen for free with caught rain water and the help of a $10 solar panel.  I offer a step by step DIY guide to walk anyone interested threw the process. You can find it at www agua-luna com or you can email me.

    There are basically 3 safe ways to make and use it... chemically, electrically and molecularly, the first 2 being easier so I'll only discuss them here. The fallowing steps were taking directly out of a DIY guide I offer to those who would like to run their vehicles or home on hydrogen safely. The entire guide is available at www agua-luna com

        On demand h2 generators are a bit different from the Hollywood versions like seen Chain Reaction with Keanu Reeves, that tend to explode violently every time a film is being made. However when used in an on-demand system there is no storage of hydrogen and oxygen in its gas form, only liquid (water) and is only transformed into gas “on-demand” in small cylinder size amounts. It’s actually safer then gasoline as it doesn’t evaporate, creating explosive fumes in the tank like gas. the following were actually taken out of my $5 guide available at www agua-luna com

        Chemically

        1. You’ll need a 6inch x 1ft schedule 40 pvc pipe. With pvc cement glue a cap on the bottom and use a s***w on cap for the top. Drill a small hole (1/4inch or so) in the side close to the top, s******g in a small copper shut off valve. Place a few feet of stranded (food grade is good) flex hose to the valve and into the air intake of your engine (carburetor or fuel injections).

        2. Now crunch up a couple aluminum cans (beer cans, soda cans etc) and drop them into the pvc pipe, along with a couple cups of lye (Red Devil drain opener has lye in it, some Clorox and Drano’s do to).

        3. Then simply add water, s***w on the top and wait a few minutes.

        What happens in simplicity is that aluminum and lye don’t really get along so they battle, and as always the innocent civilians (water H2O) that the most casualties, by giving up its hydrogen and oxygen. This then builds up in the void of the pipe and is ready to be vented into your engine, by opening the valve. You may need to start your engine on gas then switch it off after the hydrogen starts burning.

        Electrical is a bit easier then Chemically.

        1. Simply take a small solar panel 1.5 amps is what I use ($9 at harborfreight.com), connect the 2 wires from the panel +- to 2 conductors (carbon cores of batteries work well, just be careful removing it from the jacket), but any conductive material will work ie. Copper, aluminum, steel, etc.

        2. Drop the wires into a water tank (I use 55gal drums), make sure they don’t touch each other.

        3. Drill a small hole (1/4inch or so) in the side close to the top, s******g in a small copper shut off valve. Place a few feet of stranded (food grade is good) flex hose to the valve and into the air intake of your engine (carburetor or fuel injections).

        4. Then simply add water, s***w on the top cap and wait.

        After a few hours tiny bubbles will form and rise off one conductor (that’s hydrogen) and even smaller bubbles that just looks like foam will rise off the other (oxygen). I don’t remember which likes the positive and which likes the neg hydrogen or the oxygen.

        The third method is more complicated and is what I use for my vehicles. It’s just a modified Joe’s Cell, there’s a step by step DIY guide available to walk you threw the process here www agua-luna com

    It also covers the other 2 methods described in more detail.

    www agua-luna com

    Hope this helped, feel free to contact me personally if you have any questions if you’d like assistance in making your first self sufficient steps, I’m willing to walk you step by step threw the process. I’ve written several how-to DIY guides available at  www agua-luna com on the subject. I also offer online and on-site workshops, seminars and internships to help others help the environment.

    Dan Martin

    Alterative Energy / Sustainable Consultant, Living 100% on Alternative & Author of How One Simple Yet Incredibly Powerful Resource Is Transforming The Lives of Regular People From All Over The World... Instantly Elevating Their Income & Lowering Their Debt, While Saving The Environment by Using FREE ENERGY... All With Just One Click of A Mouse...For more info Visit:  

    www AGUA-LUNA com

    Stop Global Warming!!!

  6. no they dont haha. Everyone that promotes these "make at home" hydrogen fuel things always adds their web site to the info and "buy this" to learn more stuff. ITS A SCAM. comon $100 and you'll run your car on just water forever haha. if that was the case some person would patent it forget about telling people how to do it but do start a company that installs it in peoples cars for say $500 and make some serious money. The fact is it doesnt work and if you don't beleive me go buy one and email me back how it works.

Question Stats

Latest activity: earlier.
This question has 6 answers.

BECOME A GUIDE

Share your knowledge and help people by answering questions.