I am looking for a joining rubber for the main filler pipe for a Rover 25 (2000) can any one help urgent

Question

I am in Edinburgh

Answer 1

Any auto parts store has gasoline resistant hose and you can replace it with worm drive stainless steel hose clamps. If you can't find it you'll need to get it ar a registered Rover dealer.

Answer 2

Take the hose and filter box out of the car and bin them. Get down to Halfords and purchase a universal free flow air filter.You can fit it directly to the inlet of the fuel manifold where the hose used to fit. The main advantage of this is that you will never need to replace the filter, all you nee to do is wash the filter when it gets dirty.

Ja.

Answer 3

There's a couple of parts here, maybe one would suit?

http://www.sussexclassiccar.co.uk/shop_f...

Answer 4

if you go to a local garage they will have a link with a distributor who will either have one in stock or order one for you, dont know about near you but our local garages are very helpfull with things like these, they will need your reg number and maybe your engine id code, take your car in and they should sort it for you though  

Answer 5

it sounds like a fair swop.

Answer 6

If you can't get OE, motor factors like Partco stock large bore hoses in varying lengths for just that sort of application.

Answer 7

You might try this place.

http://www.famousfour.co.uk/

They show were they have used parts and are "breaking" up different models.   We call them "parts cars" here in the US.

Good luck Mate.

RoyG

KC

Proud owner of a '96 BMW 318ti so I always use the net for parts..grin