Question:

I have a 2 stroke 50cc Vento Triton Scooter. How do I change the gearbox oil?

by  |  earlier

0 LIKES UnLike

Also, is there engine oil that has to be changed? I know that it has the 2 stroke oil, but is there an engine oil too?

 Tags:

   Report

1 ANSWERS


  1. in a 2 stroke there is only the garbox oil so look underneath the bike and there should be a big bolt whihc is the drain bolt. If you remove this the gearbox oil will come out ( in some models the drain bolt may be in a different place). Once you have done that put the drain bolt back in and open the cap on top of the casing (should be around the centre of the bike) and put in the right amount of gearbox oil ( check a manual), there should be another bolt which is for the level and oil will drain out of it when you have reached the right amount of oil (the bolt should look different to the others and it should be on the side of your casing) once oil starts coming out of that hole put the bolt back in and put a little bit more oil in (only a little bit) then replace the cap. I tryed to explain it as well as possible but your scooter may differ slightly. That was harder to explain then i was expecting haha

Question Stats

Latest activity: earlier.
This question has 1 answers.

BECOME A GUIDE

Share your knowledge and help people by answering questions.