I have a 2004 Mitsubishi lancer oz rally, anyone know which one is the turn on wire in the harness for an amp?

Question

I have a 2004 Mitsubishi lancer oz rally, anyone know which one is the turn on wire in the harness for an amp?

Answer 1

If you have the factory radio installed, there is No Amp turn on wire.

You will need to find an Accy wire, one that turns on when you turn your key and turns off when you remove the key.  This will turn your amp on and off.

Bootleg the remote wire : Find a wire with your dollar store test light and find a fuse that turns on when you turn your key and turns off when you remove your key (this turns the amp on and off) If you can identify the radio fuse, that would work best) Once you remove the fuse, find which side of the fuse the electric is comming from. Next tap the opposite side of this fuse. (to tap, fold a little bit of wire over the fuse and reinsert it into the slot.) Amp should now turn on when you turn the key on and off when you remove key.

Better way for remote: If you can remove the radio, try to check if your ACCY wire has power when you turn your key. If it works, you can connect your remote to this wire and it will turn the amp on and off

Answer 2

the remote power antenna wire which is what u need to turn ur amp on and off is usually blue in color,look for blue wire or if u have power antenna,try to get to it and see what color wire is hooked to it,99% of the time they are the blue wire though.