I have a small plastic boat with some cracks in the hull from pulling it on shore any repair ideas?

Question

I have a small plastic boat with some cracks in the hull from pulling it on shore any repair ideas?

Answer 1

DuckTape.

Or... you can do it the hard way.

Get a tire repare cit and Patch it up like a tire.

if its like a RC boat then put it on and your done.

But if its like a big boad then you might want to paint over it.

A tire repare cit will work Good. its got a air tight seal.

Answer 2

did you try taping it? scotch tape. it can resist water

Answer 3

i dont know maybe grab some nails and some planks

Answer 4

Fibreglass and Resin.

On a dry day take some fibreglass resin and perhaps fibreglass fibre and brush on a coat over your cracks and let it dry.

Once it's dry it becomes hard as the hull of your boat, and permanent.

You can sand off the extra with coarse sandpaper and increasingly finer grain sandpaper to beautify it to your specs.

It's quite easy to work with, but it is very smelly.

Small kits are available at hardware stores.

Answer 5

if they are small i used J B weld on my white water kayak it held while hiting rocks and gravel.

Answer 6

If it's a flexible plastic hull, you may need to get it welded otherwise try the following site for a repair kit: Plastic Repair Kit

PLASTIC REPAIR KITS. THREEBOND PLASTIC REPAIR KIT ... All Plastex powder repair kits come with an instructional video CD and all items ...

www.atlanticjetsports.com/plastic_repa...