Question:

I have the codes but how do i program the innovage jumbo remote to an orion tv?

by  |  earlier

0 LIKES UnLike

I have the codes but how do i program the innovage jumbo remote to an orion tv?

 Tags:

   Report

1 ANSWERS


  1. Innovage Jumbo remote codes for the Orion TV: 035, 121, 135

    1. Turn on the device that you want to set.

    2. Aim the remote control at the device and press down and hold CODE SEARCH button for

    at least 3 seconds until the red LED lights up solid red.

    3. Press the device button for the item you wish to program, e.g. TV, DVD, etc. and the LED light will blink once and then remain solid red.

    4.Enter the 1 st set of 3-digit codes. You will notice that each number that you press, the LED will blink once. After you have entered the 3rd digit, the red LED will turn off indicating that the code was recognized for the device. (NOTE: If the code entered was not compatible, the red LED will flash several times. You will then need to repeat Step 2. You have 30 seconds to enter a code.)

    5. After the red LED light has turned off. Press the ON/OFF key. If the device you are trying to program powers off, then you have found the correct code. If the device does not power off, then you will need to repeat the process again from Step 3, using another 3-digit code.

Question Stats

Latest activity: earlier.
This question has 1 answers.

BECOME A GUIDE

Share your knowledge and help people by answering questions.