I need help logging in to my router (linksys wrt54g v6)?

Question

ok this **** is pissin me off,every time i try to log into my router using my default ip address which is 192.168.1.1,a little window pops up telling me i have input a username and a password.ok i know that admin is what i have to type in but it still wont let me in and i have tried all sorts of combinations like leaving the username blank and admin as the password or leaving password blank and admin as the username but still no luck then i try both username and password as admin but still the piece of **** wont let me in.please help cuz im about to punch the **** out of my computer,maybe that will work.please help.

Answer 1

just like what the guy said above.

Answer 2

based on the documentation:

Leave the username blank and use admin for the password.  If this has been changed and forgotten, then a hard reset is your only fix.

Answer 3

Look behind the router..theres a tiny reset button.  press and hold it for 10 seconds.

that will reset the router back to default id(admin) and password(blank)

Case is important, make admin all lower case.

Answer 4

Don't reset it. You will have a hel* of a mess.

Blank user name and "admin" for password.

If the problem continues, try:

1. If you're doing this via wireless (a bad idea), verify that it's

your router that you're connecting to, not the neighbors. This is an

amazingly common problem. I suggest you use an ethernet cable for

initial configuration.

2. Flush the web browser cache on your web browser.

3. Try a different web browser. Firefox, IE6, Safari, Opera, etc.

4. Cycle the power on the WRT54G v6. Leave it off for at least 15

seconds or so. Reapply power and try again.

5. Grand reset. Punch the reset button on the back of the WRT54G v6.

Hold it down for about 30-45 seconds. Don't let go. When it's done,

do nothing for about 30 seconds while it restarts. Then, unplug the

power for about 15 seconds, reapply power, and wait about 30 seconds

for things to stabilize. That's probably overkill, but it's the only

way I know to be sure that it's reset.