I need help putting a 5.7 liter hemi in a 1975 duster the electronics are complicated

Question

i have a complete 5.7 liter hemi and trans with computer from a 2004 Ram 1500 that i like to put in my Duster but need advice about approaching the computer controls i wan the computer to control the timing ignition fuel injectors and the shift points is this possible

Answer 1

yes its already been done,we beat you to it,you have to remove everything from the truck ,any wire that's on the engine take it off, cut it or unplug it, if necessary and mark it,then remove computer,with harness from truck mark every wire and what its for,you,ll need a wiring diagram from a factory service manual on this one,that's the only way it can be done,go to the nearest dealer and get them to print you one out or buy a haynes repair manual,it tells which ones are going to needed like the power wires, and sensor wires.you can also install a check engine light on the dash of the duster,with careful planning,because you,ll need it,i did one last year that took best modified mopar last year at the gatlinburg car show,but its going to take time to do this,when you get aggravated with it walk away from it i did several times,it takes about a month of panning and running wires and testing things before you,ll ever hear it run ,believe i cranked a lot and never heard this one fire up,it wont run until its all back on right,but when you get it done,its looks awesome,that's really all i can tell you the rest you have to learn as you go,good luck.