I need to replace the oven fan motor of my Creda cooker. Any advice?

Question

It's a built-in Creda Cabaret cooker and the element works but the fan doesn't.

Answer 1

easy peasy,goto www. maplins.com.whatever. click spares , enter the make/model and part you want. AND VIOLA. Then remove cooker from its place , get a s***w driver and  D.I.Y. this action will save you about £150, the fan will prob be about £20.If you not confident enough to do this, at least check out the price of the part before getting someone to do it for you.

Answer 2

when the door is open check to see if there's a plunger type button at the lower right side, if so give it a few twists, hold the plunger in and try the oven for fan going, If not, Switch off Main power to oven, inner back liner off in oven, fan blade off (left-hand thread) nut in centre, remove 3 screws around fan spindle. remove oven from housing, rest on workmate or similar, remove rear panel and there's your fan motor with 3 wires.