Question:

Installing a KSC-WD250 !!!?

by  |  earlier

0 LIKES UnLike

Hi !!! I need some help installing my KSC-WD250 on my Mazda Mx-3 93. I Just bought a sony CDX-GT320... so I plugged my sub using RCA but now I don't know How to plug it to my battery. I keep asking people and they say my sub will explod if I plug it !!!!

I need to plug the 2 yellow wires with the 5A fuse and also the Blue/White wire to the power station terminal... How do I do that ???

 Tags:

   Report

1 ANSWERS


  1. the sub has a built in amp this will need connecting to a 12v source and a earth

    you can either do this from the live on your headunit or i tend to run it directly to the battery as this you know is a good source for the power an will ensure a 110% earth.

    you then should have a little wire known as remote to tell the amp when to turn on.

    this will need to go to ether the electronic areal on the headunit or onto the ignition nswitch (so it only turn on when you turn your key to assesories)

    always make sure the sub and headunit and car are turned off when you plug it in or you get a POP sound as the leads are connected which can blow the cone off your sub(expensive)

Question Stats

Latest activity: earlier.
This question has 1 answers.

BECOME A GUIDE

Share your knowledge and help people by answering questions.