Question:

Kenwood X590 - LCD Display Gone

by  |  earlier

0 LIKES UnLike

Tech 48, I've read your instructions regarding how to fix this and I plan on doing this fix myself as I've already had the HU at Kenwood for the same problem about a year ago. I went without my HU for about 3 months! Not this time. 1. I need to know what kind of solder you would recommend for this fix. I used to work at an electronics plant several years ago and we used every kind of solder back then depending on the board that we were working on. What solder size (i.e., thickness) would you recommend? Should it have flux? 2. Do the resistors you mentioned (i.e., the ones with reference code R43, R44, R46, R47, R48, R49, R50, R51, R55, R57) say "2R7" or "2.7"? I'm looking at the manual right now and it suggests that they say "2.7" as opposed to "2R7". I just want to make sure I know what I'm soldering before I see it. 3. Lastly, should I resolder ALL of these resistors or just a select few of them?Thanks for your help. Ryan

 Tags:

   Report
Please Login to view 1 answers to this question

Question Stats

Latest activity: earlier.
This question has 1 answers.

BECOME A GUIDE

Share your knowledge and help people by answering questions.