Kwikset Delta Lever

Answer 1

The 2nd line of the 3rd paragraph should say" Once the cylinder is rekeyed place the cylinder back in place and slide the exterior handle back on"

Sorry for the oversight.

JimmiGee

Answer 2

Place the lock in the unlocked position. This is important because the path for the allen wrench is blocked when the lock is locked.

Find the small hole behind the lever handle. Insert a 3/32 Allen wrench into the hole and unscrew the set s***w for the handle until it stops. Do not unscrew too far. As soon as you feel resistance when unscrewing - STOP.

The outside handle will now slide off of the assembly. This exposes the cylinder for rekeying. Once the cylinder is rekeyed place the cylinder back in place and slide the exterior back on the assembly.

Lastly tighten the 3/32 Allen set s***w to secure the exterior handle. Failure to properly tighten the Allen set s***w will totally compromise the effectiveness of the locking mechanism.

Good Day,

JimmiGee