Lowering the water level in a toilet

Question

I adjusted the float in the tank but the water level in the bowl is still to high. Is there any way to lower it?

Answer 1

lowering the tank water is one thing, but you can not lower the water hight in the bowel. you see, the bowel has a water trap and this is what determins the height of the water.

Answer 2

You can lower the water level in the tank to use less water per flush, BUT, it will not change the water level that remains in the bowl after a flush.  That is set by the height of the 'S' curve built into it at the factory.

Answer 3

some people fill a plastic jug with water..cap it and put in the tank..helps you use less water

Answer 4

These other guys are right, the level in the bowl is not adjustable but if it is now higher than usual you have a partial blockage in the trap.    

Answer 5

Well lowering the float is the trick maybe not enough or correctly, there is a s***w/bolt at the backside of the float arm tighten it that should do the trick.

Answer 6

Cant be done

Answer 7

do it right is right