Lubricant for bicycle?

Question

Hi, I used some Fenwicks 'All Conditions Lubricant' on my brake cables, pivot points etc. on my bike instead of using a light lubricant. Will it be okay? I assume it is meant rather as a chain oil.

Answer 1

For cables you want to use white lithium grease.  Phil Wood grease is also a good lubricant if you want high quality, but simple white lithium will do you fine for most any cable & housing.  You want to use this type of lubricant for cables as regular lubricant (like Tri-Flow for example) is too light and will dry out too soon.  A heavier lubricant like white lithium will remain on cables for years and it also has water repellant qualities.  You don't want to use something too heavy though, like axle grease as this will attract dirt and grime.  Take a pinch of grease and run the brake/gear cables through your fingers and grease to get a light coat.  Then run the cable through the cable housing and wipe off the excess.  This simple step will go a long way in extending the life of brake and gear cables.

Answer 2

It's good that you're at least using something and your heart's (or head) is in the right place. Just be sure and wipe of all the excess lube that you can so it doesn't attract dirt.

But you'd be better off going to a bike shop and buying lube specifically meant for bicycles.There are many different brands. I used to use TriFlow just because I liked the way it smelled! LOL! But since then I've found other bike lubes that work better. My point being that there are lots of choices. Some better than others.

Answer 3

Use the all condition.