Question:

Masking tape residue after nightmare DIY painting job --PLEASE HELP

by  |  earlier

0 LIKES UnLike

Hello

I am finally at the end of a nightmare DIY job painting an outside door with gloss and to cut a long story short its been a right pain the back side and I am on my fourth coat .

The masking tape I put around the small windows was on a lot longer than expected ( around 4 months ) and now that Ive started to take it off it is sticking to the glass and not peeling off and is leaving horrible baked on glue residue .

Please can somebody help me recommend how I can get this off without scratching the glass panels - washing up liquid , water and white spirit do not work and I don't want to use abrasives

Please can anybody help ? thx

 Tags:

   Report

7 ANSWERS


  1. try methylated spirits on a cloth.


  2. a blade and  some cello use thinners best  result

  3. You want a small bottle of "Sticky Stuff Remover" (that is the actual name) from a hardware shop

  4. WD-40 spray oil usually works- spray on and leave for a while.

  5. spray some WD40 on a cloth and rub the glass this will take the glue off then clean he window with Windex or vinegar.

  6. Put some mayo on it....leave it for about an hour and go back and it will wipe right off! I know it sounds funny but it really works, the oil in the mayo eats the glue right off!

  7. Patience, a steady hand and a razor blade

Question Stats

Latest activity: earlier.
This question has 7 answers.

BECOME A GUIDE

Share your knowledge and help people by answering questions.