Motor burnt out on my back door of my car. window is down. how can I manually put it up Car is Mercury topaz

Question

it's a 94

Answer 1

There should be a drive access on the end of the motor that would allow you to turn the motor with a s***w driver or a square drive. You will need to take the door panel off to gain access to the motor.

Answer 2

I'm sorry, but you can't just pull the window up. You are going to have to take the inner door panel off. That will probably involve you unscrewing the arm rest and prying up on the various clips towards the outside of the panel. Then you have to lift the panel up and out to remove it. Then you will have to disconnect the motor from the regulator. Then you can work the regulator to get the window in the desired position. Once you have it there you will have to reconnect the regulator to the motor to keep it from falling. Then you can put the inner door panel back on.

Answer 3

  have  someone  help  you  one  push  the  button  and  one  grab  the  glass  and  try  to  bring  it  up  and  then  leave  it  alone  

Answer 4

take the inner door panel off and unhook the glass from the regulator and pull it up and block it up with some wood or something.

Answer 5

Yes, but you have to take the inside door panel off. It is kind of tricky really. But the car really isn't worth a mechanic is it?

Good Luck

Answer 6

See if you can get a pair of needle nose in there and just pull up. Or you will have to take the door panel off and push it up. Be careful not to break the glass. Your best bet is to call a shop or an auto glass company, they can fix it for you.