Question:

My 92 Chevy silverado pulls to left when braking, nothing helps?

by  |  earlier

0 LIKES UnLike

I have replaced the calipers on both sides, brake pad, pittman arm, adjusted the steering, and it still pulls when you brake, any help please

 Tags:

   Report

5 ANSWERS


  1. Did you replace the brake hoses?  That sounds like your problem if you didn't.  If you did in fact replace both front hoses then try replacing your rear brake hose(s).


  2. Check the control arm bushings and brake hoses.

  3. there could be a couple of things going on. first the rubber brake hose on that wheel may be collapsed. if the hose checks out OK you may want to rotate your rotors. i know it sounds like BS but i am a mechanic for a living and i have run into this before.

  4. you didn't replace the front brake hoses did you?, replace them.

  5. I recommend rebuilding or replacing the calipers.

    see brake pull at the link below. also clean and lube the caliper slides.

    Did you replace the calipers or the rotors?http://www.autozone.com/R,547897/vehicle...

Question Stats

Latest activity: earlier.
This question has 5 answers.

BECOME A GUIDE

Share your knowledge and help people by answering questions.