My ice maker on my kenmore refrigerator stopped making ice all of a sudden?

Question

I checked if there was water going into the line and there is but it is not coming out of the tube to fill the ice maker,it does dispense water though out of the water dispenser.I'm stumped can anyone help me?????

Answer 1

Try looking here for some help:  http://www.repairclinic.com/0088_4_1.asp...

It could be turned off (somebody lifted the lever) or the freezer is the wrong temperature.

Answer 2

something plugging the tube.Stick a piece of wire or something in there .

Answer 3

The water inlet to the ice maker, in the freezer section, may have froze up.

If the ice bin is in the door, it might just take unplugging it for a few minutes to re-set the software in the light emitter board.

If the bin is in the freezer section itself, check the sensing arm, it needs to be in the down position.

Answer 4

pull the ice bin out and look up top where the ice dumps, mine has a bad habit of getting a cube that doesnt come completely out. it stops the whole process until its removed.

Answer 5

Check for frozen feeding pipe, plus the first 2 answers.

Answer 6

All ice machines have a means of starting and stopping the fill.

Some do it with a lever and a micro switch and some do it with float .

Look closely.See what works.Bet that's the problem,

Good luck.