My stools are too high for the pub table how can i fix it?

Question

My stools are too high for the pub table how can i fix it?

Answer 1

cut the legs or get new ones

if u cut then measure very carefully

Answer 2

Gosh that is a hard one. You say the stools are too tall for the table....hmmmm I guess what I would do is cut a hole in the floor so you can lower their height.

Or maybe you could hang the table from the ceiling to make it taller.

There might be something more obvious that you could do, but I just can't think of what it could be.

Answer 3

I regularly cut a bit off stools to adjust them down for customers.  As long as there is a non-detailed foot, this is not hard to do.

Answer 4

It will be easier to raise the base on the table than cut off the bar stools.  Sometimes common sense escapes all of us...tooshay!

Answer 5

Get a sharp hand saw.  Put a layer of masking tape around each leg approximately where you want to cut.  With ruler or tape measure, mark each leg 3 or 4 sides the intended cut height.  Connect the marks making a circle around the leg.  

Repeat for all legs.  Repeat for all stools.  Cut should be parallel to floor, not a perfect circle.  Take stools outside.  Cut one stool.  Bring first stool inside and check.  Small height difference can be adjusted with course sandpaper.

Or add wood to table to increase height.

Answer 6

yes, cut them if you can.  and if you cant get them all even get the adjustable leg caps from a hardware store that you can srew in or out to make tiny adjustments.  

if the stools cant be cut then i guess you could build a little platform for the table to sit on