My toilet won't flush..?

Question

When I press the lever to flush,nothing happens,no water ,no flushing, is something broken?

Answer 1

Bet the chain to the tank drain flapper is broken or not attached to the handle.

Answer 2

som one took a big ****

and its cloged

get a new toilet

with a **** detector so if the **** is to big then it throws it at the person who took it

Answer 3

sounds like the diafram in the fluid master is bad,it would be cheaper just to have another put in rather than try to repair it yourself,they're about $7or 8 at your local hrdwre store,and they will show you how to unstall it,be sure to buy a new supply line to go with it.

Answer 4

See if the chain came off. lf the handle feels like its lose that might be it. sometimes the handles will crack but look fine to the untrained eye. lf you remove the lid and the chain is still hooked to the handle and the flapper at the bottom,and when you try to flush it the handle feels springy, replace the handle . $3

Answer 5

if when you press on the handle, theres a little pressure then it gives, that's good, if not, then the floating thing in there is unhooked from the stopper at the bottom of the tank, or is in some other way broken. check that piece....oh, and the water in that part is clean, dont freak over putting your hand in it