The Kenmore washer in my new house has never worked right - it is the same model as the one I had in my last place, so I am pretty familiar with it... but this one will only fill up partway with water. I estimate it is about 5-7 years old, in good shape, looks quite new.
We are in a rural area and have a well and pump. Water pressure is not the greatest - at first I figured that was the problem, but we recently installed a new pump, and the overall pressure is a lot better, but the machine still will only fill up about 1/4 of the way. I let it run for about 30 minutes today in hopes that it would fill but it didn't.
I have tried running very small loads and seeing if that will work, but the machine never fills and thus never advances to the next cycle. You can manually move the k**b and it will agitate and spin and move through the cycles til it gets to the rinse, at which point it hangs up again.
Any ideas? Thanks!
Tags: