My washing machine wont agitate or spin

Question

Its a kenmore washer and has no belt, if u have any pictures or video s or a detailed description on how to fix it part by part

Answer 1

If you smelled rubber you will have to replace the part from the back.It looks like a rubber washer with holes in it. its approximately 3/8 to half inch thick.Tilt your machine and check the bottom.If you see black rubber dust then this is the problem. Those washers wear down and break. It's common.You can buy them in the stores where they sell appliance parts. Not sure if Home Depot has them.About $10.00cnd.

Answer 2

A kenmore washer operates the spin cycle and agitation mode using a solenoid-driven cam that actuates the transmission. Could be that the solenoid or the circuit that powers it (back up to the timer) has gone bad. It's been a long time since I got into the transmission of a washing machine. So, that's about all I can tell you.

Answer 3

does the timer still run (the k**b goes around) if not its most likely the timer if the k**b stops turning give it a little help and see that the machine still functions.Parts are available at sears