NForce motherboard help (WITH PICTURE)?

Question

here is picture of the nforce 780i motherboard. could some one tell me what goes where please and what slot is what? thanks

http://img380.imageshack.us/img380/1865/790ioc5.jpg

Answer 1

for gods sake read the intruction manual it will help u a lot

Answer 2

well it nFORCE 790 i sli

and ya read the manula if you havenot  build a computer before DON'T DO IT THIS IS A VERY GOOD MOTHERBORD AND IT NOT MUST BE LOSED GET IT TO SOMEONE WITH EXEPERT SOMONE BUILD COMPUTERS SOMEONE PRO

Answer 3

Dude, you didn't get the Motherboard Manual with this? What's with the IXBT logo on it?

1.The ram slots are black, there are four, and they're on the bottom right.

No.1 slot is closest to the processor.

2.The green long slots are PCI-Express x16 slots. If you install three graphics cards at the same time, two will run at 16x, with one at 8x.

3.The white slots by the green PCI-E x16 slots, are PCI slots.

4.The white connector by the front of the mobo,(Motherboard), that has 24

socket holes, is the 24 pin ATX power supply to motherboard connector.

5.The connector to the left of it is the 40 pin IDE header.

Tell me who made it, and I'll see if I can find a PDF Motherboard Manual to download. This will tell you where the connectors go for the Front Panel header on the mobo.

Answer 4

You should have a Manuel,that came with your board.If not bring it back and get one with Manuel.Or go to the manufacturers site and download the Manual.