Need amp for 2 12" subwoofers?

Question

Description: 12" Subwoofers

Power Handling

2400 Watts Power Handling (Pair)

1200 Watts RMS Power Handling (Pair)

1200 Watts Power Handling (Each)

600 Watts RMS Power Handling (Each)

Frequency Response: 20 Hz - 500 Hz

Nominal Impedance: 4 Ohm

Sensitivity: 87.2

Voice Coil Diameter: 2.5"

Dimensions:

Mounting Diameter: 11-5/32 " (283mm)

Mounting Depth: 6" (152.4mm)

Speaker Displacement: 0.13 cu.Ft /3.7 liters Subwoofer

Answer 1

i would recomend the Fosgate 1000-1 or the Kenwood KAC-9104D. Both 900-1200 watts RMS and 1-ohm stable. wire the subs to 2-ohms then connect them to a mono amp to get a 1ohm load. it will make the amp work harder but u will get maximum power out of it.

Answer 2

well u didnt tell me if they were dual 2 or 4 so if they r dual 4 subs, ur best bet would be to go with mtx audio thunder TA-7801 mono amplifier...i guarantee u that u wont be dissapointed and its only like 260 dollars before shipping either at ebay and u can get it at sonicelectronix.com....that amp is 1200 rms at 1 ohm and its a lil underrated...i have one and im pushing 3 12 400 rms pioneer premiers with ease and they pound....good luck

Answer 3

I guess you'll want to look for an amplifier that puts out about 1,200 wrms at 2 ohms.  However, once you start to get into this amount of power, you'll also want to start thinking about upgrading your alternator and doing the big three upgrade on your wiring.

Answer 4

i'd go with a JL 1000/1 on it .