Need dimensions for a Washers type game with a bolt!

Question

I'm looking for dimensions for a washers game. It's played on a board that looks just like a cornhole board, but about half the size. It has one hole. Above the hole is a bolt that you try to ring the washer on. You get points for landing the washer on the board, more if its in the hole, and even more if you get a ringer. I need the dimensions and/or rules if anyone can help! My boards were crushed and thrown away!

Answer 1

THis is how the washers game that we play is built.

Materials

4 pieces of cut 2×4 (14½” long)*

1 piece of cut ¾” thick plywood (16×16)*

8 wood screws (3” long)*

4 wood screws (1¾” long)*

1 PVC pipe 4” diameter (cut to 3¾” long)*

4 L Brackets (1” with single hole)*

4 #8 ¾” nuts & bolts

4 wood screws (¾” long)

1 piece of carpet (13×13 with center hole)

s***w driver

saw

drill with #8 size bit

staple gun

  

Directions

Assemble the 2×4’s into a square frame (use 3” wood screws)

Attach the 16×16 piece of plywood to the frame of 2×4’s (use 1¾” wood screws)

Drill 4 holes in the PVC for the L Brackets (use L Brackets to measure hole placement)

Attach L Brackets to PVC (use #8 ¾” nuts & bolts)

Cut carpet to 13×13 with center hole (use PVC to measure center hole)

Attach PVC to inside of box (use ¾” wood screws, use carpet to measure placement of PVC)

Insert carpet over PVC and staple down

Play Washers!

Notes

Most hardware stores such as Lowes and Home Depot have inexpensive scrap wood sections and they can also make the cuts for you. Drywall screws work in place of wood screws. For the PVC, a 4” coupling works perfect, and no cutting is involved. The L Brackets are not necessary if you use very thick PVC. You can just s***w the PVC directly to the plywood from the bottom. Our experience has proven that L brackets make the PVC more interchangeable if it happens to crack