I was sewing over a fleece seam (not even that thick) and the needle broke and bent, so I change the needle thinking it was just another breakage, but now when i turn the wheel manually the needle gets to the top and is hard to move and the needle changes positions! On top of that the needle wont catch the bobbin thread, it looks like it wont go down far enough. I looked inside and when the wheel is turned and reaches the top the arm connecting what ever it is that moves the needle position pulls to the side and makes the needle move to the side and then snaps back into position once the needle starts to come back down again. And there is a little black thing that moves when the needle position is changed but it struggles and stops when it gets to one side, its attached to the back of some flat cylinder box thats on its side.Thats probably a horrible explanation but its all i can really say:S Nothing like this has happened before and i use the machine everyday, id rather not have to fork out another couple hundred dollars to get it fixed if i dont need to. PLEASE HELP i really need to get back to work:( Thanks!!!!!Nikki
Tags: