My Juki TL-98Q has been working just fine, except on my latest machine quilting project. I have the 98Q paired with a SuperQuilter frame and am using the Quilters Cruise Control. I have followed Juki instructions for quilting; i.e., drop feed dogs, set stitch length to "0", green pressure bar set at top. Am using Coats and Clark Star machine quilting thread in the needle and RSC rayon embroidery thread in the bobbin. The stitches are even but after several inches of stitching, the thread breaks. I have changed to needle, which is a Schmetz 130/705 H-Q No. 90 Can't think of anything else to try. Bobbin thread moves easily from bobbin, as does the needle thread.Any suggestions would be very much appreciated. Ann Lillich, Cimarron CO
Tags: