No cold water pressure in bathroom sink or shower?

Question

no cold water pressure

Answer 1

If the hot water is okay, then you

may have a leak in your pipe, call

your plumber ASAP a leak in the

wall is bad news, and can cause a

lot of damage that you don't know

about until it's too late.

Answer 2

I do all kinds of questions......................

i do leaking pipes too !

The most obvious , problem you may have is there is a

leak somewhere..................................

or you need to go and adjust your pressure, if you don't

know where or how, get yourself a plummer.

Answer 3

We had that problem in our bathroom a couple years ago and it was because a pipe in the wall had broken and water was leaking like crazy.  Call a plumber asap.  Water can cause  a lot of damage in no time at all.

Answer 4

you probably have bad plumbing...you need 3/4" plumbing throughout the house and when it breaks off to the bathrooms/areas of need..it becomes 1/2" plumbing. This creates the pressure.

Answer 5

If you have well water then its your pump. If your pump is above ground then you have a dead bug or frog on it. If it under than call a plumber. If you don't have well water than call a plumber.

Answer 6

there may be a valve off somewhere or mybe worse a water leak somewhere? check it out

Answer 7

Check:

- Does your house have a cold water sediment filter on the line from public water or a well? If so, maybe the filter canister is clogged.

- Remove the s***w-on aerator from the faucet and check for sediment clogging the screen

- Is the the cartridge on the shower diverted filled with debris? Shut off the water supply valve to the bathroom and pull the cartridge to inspect

If all this is beyond your skill level, call a plumber.