Ok now i have the code for the jumbo remote but how do i program it ??

Question

Ok now i have the code for the jumbo remote but how do i program it ??

Answer 1

Innovage Jumbo Universal Remote

1. Turn on the device that you want to set.

2.  Aim the remote control at the device and press down and hold CODE SEARCH button for at least 3 seconds until the red LED lights up solid red.

3. Press the device button for the item you wish to program, e.g. TV, DVD, VCR, etc. and the LED light will blink once and then remain solid red.

4. Enter the  3-digit code.After you have entered the 3rd digit, the red LED will turn off indicating that the code was recognized for the device.

(NOTE: If the code entered was not compatible, the red LED will flash several times. You will then need to repeat Step 2. You have 30 seconds to enter a code.)

5. After the red LED light has turned off. Press the ON/OFF key. If the device you are trying to program powers off, then you have found the correct code. If the device does not power off, then you will need to repeat the process again from Step, using another 3-digit code