Paintballing with the Jt Tac 5 Recon?

Question

Ok so i just bought the jt tac 5 recon paintball gun and it says that it has a Multiple position feed port. my question is how do i change the feed port like does it bend or something please help me! it would help me out a whole lot THANKS! :d your yahoo friend MIKe

Answer 1

The feed port has three positions - vertical, 45 degrees to the right, and 45 degrees to the left.  The 45 degree offsets allow you to move the feed neck so you can aim down the site rail, use a scope, or laser sight.

The marker should come with the feed port in the vertical position.  If you want to move to the right or left, start by removing the two screws along side the feed port.  Move feed port right or left, align s***w holes, and reinstall the screws.  Remove the Gorilla grip feedneck, install the 45 degree elbow that should come with the marker, then attach the feedneck to the elbow.

Answer 2

this might mean that on the feed port there maybe a a switch to turn to allow the hopper to be on either side of the marker or it could just mean that it works well with a straight feed

( hopper is straight up and down) or you can use an elbow so you can see down the marker. hope it helps some