i have a problem with fasteathernet port in my cisco router ,which that i have high INPUT ERRORS wh i used " sh int " command i want to know what is that refer to ?
the following what is apper :
FastEthernet0/0 is up, line protocol is up Hardware is Gt96k FE, address is 0016.9da3.08f2 (bia 0016.9da3.08f2) Description: $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-FE 0$ Internet address is 10.18.1.2/16 MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:00, output 00:00:00, output hang never Last clearing of "show interface" counters 4d18h Input queue: 0/75/240/0 (size/max/drops/flushes); Total output drops: 168358 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 50000 bits/sec, 36 packets/sec 5 minute output rate 54000 bits/sec, 32 packets/sec 40309846 packets input, 3202249187 bytes Received 650225 broadcasts, 0 runts, 0 giants, 1 throttles 202461 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog 0 input packets with dribble condition detected 4661712 packets output, 2311390016 bytes, 0 underruns 0 output errors, 0 collisions, 0 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out
Tags: