Please help: Bathroom sink= no water? Any suggestions?

Question

I turn the handle, and water doesn't come out. I've tried turning on the valve, but then the water wouldn't stop with the handle, so I had to turn it off with the valve. Can anyone please help me?

Thank you.

Answer 1

It sounds as if the rubber O-ring is gone in the faucet.

With the bottom valves shut, take the s***w out of the handle of the sinks faucet. Remove the handle.  Then undo the nut holding the valve, pull the valve out. You will see a s***w holding a rubber o-ring. Go to the hardware store and buy a bag (5-6) o-rings. Go home and replace the o-rings in both taps. If one is gone the other is close to failing as well.

Answer 2

Sounds like your bathroom taps need replacing. The problem you are experiencing may have been caused by limescale, in which case a limescale prohibitor on your incoming water main would be a good idea. It could also be the rubber seals within the taps, which could possibly be replaced at a cheaper cost.

Answer 3

Needs new washers or O-rings etc. depending on the type. Worst case change the taps. Less than an hour to do for experienced person.

Answer 4

If you have a good water supply (with the valve on) and just can't turn it off with the faucet, you need a new faucet.  

Turn the valve off before installing!

Answer 5

Employ a plumber! Sorry but that really is the best option.