Question:

Procedures to set up remote control for Sanyo tv?

by  |  earlier

0 LIKES UnLike

using chunghop remote control 33E+

 Tags:

   Report

3 ANSWERS


  1. Follow these steps you can't go wrong.

    1.Switch on your home electric appliance manually. Place RM-33E directly in front of your home electric appliance, i.e. Your television.

    2.Press the "TV" button on RM-33E, until the signal light is switched on. (Note: When any of the Electric Appliances Selection Buttons is pressed, the signal light will be dimmed once, and then it will be switched on again)

    3.Press the "Volume +" Button and the "Channel +" Button at the same time. Do not release both buttons. Release both buttons only when the signal light is switched on. (The Procedure is as follows: The signal light is switched off---> The signal light flashes twice --> The signal light is switched on)

    4.Keep on pressing the "Main Power" buttonuntil the television shuts down. Release the button and stop searching.

    5. Check if the other buttons are in a working condition. heck if the setting Procedure is completed. If the buttons do not function, please repeat Steps 2 to 5.


  2. you should look at the instructions and follow them

  3. Hi ruben a,

    You can find remote codes here - http://www.hifi-remote.com/ofa/codes-tv....

    Use them and enter the proper codes into your remote.

    Norm

Question Stats

Latest activity: earlier.
This question has 3 answers.

BECOME A GUIDE

Share your knowledge and help people by answering questions.