Programming new key on 2007 Ford Fusion?

Question

Manual says that you need two keys available in order to program additional keys. Does it matter if I have one IKT (key with built-in remote) and one regular PATS key? I can't just try it to see if it works since I haven't bought any additional keys yet.

Answer 1

ask the dealer, they should know what  can be done, I'd guess you aren't the first person to have this dilema

Answer 2

Will both keys start the car? If the will then follow this prcedure.

Put first key into ignition and turn to run position and watch when security light goes out. Immediatly put the second key in and do the same and then the third key in with same results only this time you should be able to start the engine with the last key. If it does not start the engine thwen remove third key and do steps same way with this time on the third key, remove key when light goes out,wait 10 seconds and attempt to start engine with last key to be programmed. If this procedure fails then it may be bad key or customer preference may be disabled and will have to have diagnostic equipment to resolve this concern.

Hope this helps and have a great weekend.