Geforce6100SM-M beep codes?

Question

Where can I find out what 5 1-second beeps means with this motherboard?

Answer 1

[One Beep]

DRAM refresh failure

This may be due to - Bad memory chips

                              - A bad DMA Chip

                              - Bad memory addressing chips on the motherboard

[Two Beeps]

Parity error or Parity Circuit failure

Your memory may not be seated properly on the mother board.

Unplug and plug it properly

[Three Beeps]

Bad memory or bad mother board

[Four Beeps]

Timer failure in the RAM.

[Five Beeps]

CPU chip may be dead

[Six Beeps]

Keyboard controller may have failed

[Seven Beeps]

CPU is dead. Retry the connections and test.

Replace the whole motherboard.

[Eight Beeps]

Video card is missing or Bad.

[Nine Beeps]

Damaged ROM BIOS. BIOS chip has to be replaced if it persists.

[Ten Beeps]

CMOS shutdown. Replace CMOS memory and associated chips.

[Eleven Beeps]

Cache memory test has failed.

To enable cache memory try CTRL+ALT+SHIFT++.

[One Long Beep and Three Short Beeps]

Memory failure

[One long Beep and Eight short Beeps]

Video card failure. Try to install video card in another slot.

[No Beeps]

Check Power supply

Check mother board connections

Remove all cards except video card and check for system power up

Insert all cards one at a time and check their operation.

If system hangs on the installation of a particular card, then it is the cause for the problem and replace it with another of that type and check