How easy is it to build?

Question

how easy is it to build a wall fountain?

like this:

http://www.lagunawaterworks.com/IF-S-20-GRN-LRG.jpg

It does not seem that bad.

Get a cheap piece of left over Slate.

Get a pump.

then 2 steel pieces for the top and bottom

Answer 1

Well if you have the proper materials and research how to do it it should take about a week or so

Answer 2

ok so whats your question

Answer 3

The trick is to get the water to flow down the fountain properly. We installed a 25 ft fountain in a store. The guy who came in to get the water flowing properly took almost a week to get it flowing down and not out to the sides. And this was a fountain prepared at the factory.  Good luck!

Answer 4

As long as you have some diy experience it would be pretty easy.  The biggest concerns would be keeping it from tipping and keeping the water inside.

Answer 5

the biggest thing is getting the water to flow evenly acroos the slate they usually have a resivour aqt the top which the pump fills with a lip on it to make it flow evenly .easy mate you'll be sweet