Question:

Remote Control code required - for BT Vision controller for Grundig T55-1010. BT published codes no good.?

by  |  earlier

0 LIKES UnLike

The BT Vision remote can#'t alter the volume on my Grundig T55-1010 TV. None of the 18 or so setup codes provided by BT in the technical manual work so BT advice is to check the internet!! Over to you.... please.

Thanks in advance.

 Tags:

   Report

1 ANSWERS


  1. 1. Press and hold the "Volume +" and "Mute" together for a minimum of 3 seconds, until the LED blinks three times, release the keys.

    2. Enter a zero followed by first the 3-digit code for your brand of television.

    3. With the first 3 digits, the LED will give a short blink. At the 4th digit, the LED will blink three times if a valid code has been received. (If the code entered does not exist or an incorrect key was entered the LED will give one long blink and exit the setup mode - go back to step 1)

    4. Power on the TV and try out the dedicated TV buttons on the TV. If there is no reaction on the TV repeat the previous steps for each code listed for your TV brand.

    5. After completing this process the remote will have switched to TV mode, check the functions on your TY then press the 'Mode' button at the bottom left to turn it back to BTVision mode. The BTVision button will flash quickly to confirm this. The code number for the TV mode is saved in the remote's memory and will be retained during battery replacement and other interruptions.

    Grundig codes remember to add the zero so it becomes a 4 digit number: I hope this has been of some help.

    001,004,026,034,052,109,119,

    138,189,195,211,230,232,248,267,268

Question Stats

Latest activity: earlier.
This question has 1 answers.

BECOME A GUIDE

Share your knowledge and help people by answering questions.