Question:

Replacing the windshild washer pomp.?

by  |  earlier

0 LIKES UnLike

Hi, everyone.

I have 94Honda Accord and want to replace the windshild wosher pomp.

How can I do it and where is it located.

Thanks.

 Tags:

   Report

4 ANSWERS


  1. it is on the side of the washer bottle it self. a little bit of fun to get to. i get to mine by removing the front bumper on a 90 civic.  


  2. look for the washer bottle fill. on that side of the car take out the inner fender well and it should be accessible through there.Usually the old pump pulls right out of the bottle

  3.    1.Disconnect the negative battery cable.

       2.To gain access to the reservoir, either remove the front bumper or engine under cover.

       3.Disconnect the filler tube.

       4.Unplug the electrical connector and remove the hose(s) from the pump(s).

       5.Remove the washer tank with the motor(s) attached by lowering it out of the car.

       6.Remove the motor from the reservoir. On Preludes, the motor is held by a retaining clamp.

       7.Reassemble in reverse order. Make certain the motor is firmly seated on the reservoir and all clamps and seals are in place. Don't forget to connect the wiring and hoses. Take care to align the bumper properly.


  4. better get yourself a book.

    Its in the bottom of the windshield water reservoir

Question Stats

Latest activity: earlier.
This question has 4 answers.

BECOME A GUIDE

Share your knowledge and help people by answering questions.