Rm125,question?

Question

is there any way that i could lower this bike's seat hight about a few inches?by messing with the Suspension or something?

i need something that i could put it back to normal when i get to big for it.

Answer 1

A few people have asked this question and the only way that you can make it a bit lower is to take the cover off the seat and get an electric knife and carefully cut the foam seat down .  take the piece off and if you have been careful then you should have two pieces. get a staple gun and staple the seat cover back in place.  When you grow you can then put the piece you have cut off back on by removing the cover and just sitting the missing piece back held into place by a couple of pieces of strong tape and the cover back over the top.

We had to do this to one of my sons bikes as he was way to short for the bike even with a starting block on the start line.

If racing are you using a starting block as that can be really helpful.

Answer 2

if you mess with the suspension it will be bumpier

Answer 3

If the seat is to high for you, then you should have gotten a smaller sized bike, like an RM 100 instead.