Snowboard binding question ^^?

Question

hey, well i just got a pair of Burton Custom and I have to say, they look fantastic :D.

Well anyways, I installed my bindings on my snowboard and they look nice. Heres the problem....

I seem to have installed the baseplate upside down to each other. Like

http://img134.imageshack.us/img134/5456/dsc00344bh1.jpg

the first image is my left binding (front) and

http://img252.imageshack.us/img252/9757/dsc00345fj1.jpg

the second image is my right binding (back)

as one can see, the base plates have is opposite of another. Because there was like 4 arrows on side on the circles, i got confused when i put them :S.

I'm wander if i should reinstall the bindings or is it okay if I leave it like this. These are burton baseplate, unidisk.

Thank you for your help :D

Answer 1

As long as the screws are tight and your toes and heels are centered on the board with neither dragging on the snow when you turn, go out and let 'er rip.  The base disks are designed to give you options, especially since it is common to put the front and back at different angles anyway.  Put down your screwdriver and go make turns!

Answer 2

With every binding that I've ever mounted, the only difference between the disks should be the zero degree arrow - so as long as you have the bindings at the angles that you want them and you are able to tell what angle they are at, this shouldn't be a problem.

Good Luck

Answer 3

Well the pics were a lil blurry so...

The idea for the pointers are so you'll know at what angle or degree your stance is set on for customization. But if you don't care about that and the bindings are at the most comfortable position for you then don't bother fixing them.

Answer 4

nope, both plates are in the center holes, so they're basically the same.

Answer 5

Nah, they're fine.  A baseplate is a baseplate, and the only difference is that Burton uses a different s***w setup.  As far as I know, only Burton uses different s***w placement, and it doesn't look like you're riding one from the way you just screwed them in.  So as long as all four screws are locked in tightly and your baseplate and bindings aren't raised for some strange reason, you'll be fine.